Gerin Model V-3 Falling Ball Viscosity Comparator
The Gerin Model V-3 Falling Ball Viscosity Comparator instrument measures viscosity and detects contaminants in lubricants. This viscosity test method utilizes the principles established in ASTM D 445 Standard Test Method for Kinematic Viscosity of Opaque Fluids. Viscosity comparison tells you in advance if a problem exists now, not after the equipment goes back into service. The only sure way to lengthen time between overhauls and oil changes.
​
Kits manufactured to test diesel, gasoline, turbine lubricants, and unknown samples against the standard of new oil. Kits measures in changes in viscosity caused by fuel dilution, coolant leakage, dead filter, polymerization or any other alteration of original viscosity. Easy to operate, any technician or mechanic can do reliable tests every day. There is not a more accurate test method made designed for use in the field to measure change in viscosity.
​
​
Suitable For:
​
COMMON CARRIERS TUG BOAT OPERATORS
FERRY SERVICES YACHT OWNERS
MARITIME FLEETS
​
The Gerin Model V-3 Falling Ball Viscosity Comparator instrument provides a “First Line of Defense” against premature engine wear. A lubricants properties become compromised when even small amounts of fuel are mixed with oil. Load carrying properties drop dramatically as does the flash point of the oil allowing it to be burned off during the combustion process allowing pistons to run up on a dry cylinder wall. This is when wear is greatest and this can be prevented when fuel dilution is discovered early on with the Gerin Model V-3 Falling Ball Viscosity Comparator. Early detection of poor lubrication will prolong miles and hours between major overhauls.